System settings - com port – ETC Cobalt Family v7.1.0 User Manual
Page 156
Advertising

Cobalt 7.1 - 20140612
155
System Settings - Com Port
This is used to set up the COM port(s) of your Congo Jr or Cobalt Light Server system. This has to be
defined if you are communicating to an external device through the serial port OR if you are using an
older TT Radio Remote.
Consult the manual of your device for the required settings of the serial port. Please observe that you
cannot use the same serial port for radio remote and trigger devices at the same time.
Advertising