ETC Cobalt Family v7.1.0 - Manual (Page 477)

Cobalt 7.1 - 20140612
476
As soon as balance mode is activated, it is indicated at the top of all screens.
Action Key Feedback
1. Select the channels to
work with See Channel Command
Syntax
2. Activate Balance
Mode [BALANCE] All other channels in the
channel view will be set to
0% temporarily. You can
now work with the selected
channels.
3. Exit Balance Mode [BALANCE]
The channel levels that
were muted are restored.
NOTE
It is not possible to use RECORD when Balance mode is active.
Balance Mode Key
It is possible to set the REM DIM key to function as BALANCE instead. This is done in the System
Settings.
See System Settings - Channel