ETC Cobalt Family v7.1.0 - Manual (Page 270)

Cobalt 7.1 - 20140612
269
Patch a single output
Action Key Feedback
1. Select output [#] [OUTPUT] Output is selected. You can
use the format
output.universe.
2. Patch to channel [#] [MODIFY] A popup will ask if you
want to replace existing
channel*
3. Confirm
[MODIFY]
Patch is complete.
*
Patch an output range
Action Key Feedback
1. Select output range Output functions Outputs are selected
2. Patch to channel(s) [#] [MODIFY] A popup will ask if you
want to patch all to one
channel or as a range*. Use
0 to unpatch selected
outputs.
3. Confirm [MODIFY] Patch is complete.