ETC Cobalt Family v7.1.0 - Manual (Page 775)

Cobalt 7.1 - 20140612
774
Main Playback - Transport Keys
These are the transport keys of the Main Playback.
Function Key
Start a crossfade* [GO]
Start a new crossfade during an ongoing crossfade
[GO]
Pause a crossfade [PAUSE]
Crossfade to the previous step [GO_BACK]
Reverse an ongoing crossfade by making a crossfade to
the previous step
[GO_BACK]
Step (without times) to the next step [SEQ+]
Step (without times) to the previous step
[SEQ-]
Open the GOTO list** [GOTO]
Crossfade to any recorded preset on the stored or default
times [#] [GOTO]
Relocate the sequence from preset # in B (Next)
[#] [JUMP_TO_B]
*When a crossfade is completed there is a beep.Turn this off in the System Settings - System .
**See The GOTO List