ETC Cobalt Family v7.1.0 - Manual (Page 177)

Cobalt 7.1 - 20140612
176
Exit to Welcome Screen
Press MODIFY to exit to the Welcome Screen. From here you can start as Server, Backup or Offline.
You can open System Settings and Quit.
In the message box you will be notified
• If there are Cobalts with different software versions running on the same network.
• If the same sACN or Net2 universe is mapped to multiple Cobalt universes.
1. In the top left corner you will see if there are multiple user setups, for example for different
tv-studios.
2. In the top right corner network and command syntax settings are shown.
3. Start Offline
4. Backup
5. Server
6. System settings (See
Exit to System Settings )
7. Quit
8. Current software version and build