ETC Cobalt Family v7.1.0 - Manual (Page 445)

Cobalt 7.1 - 20140612
444
Sequence - Assign Fade Curves
Assign curves to a sequence step in the Sequence Editor.
Action Key Feedback
1. Open the Sequence
Editor [MODIFY] &
[PLAYBACK] The Sequence List is
opened.
2. Move to the column
"Fade Curve" Arrow Keys The cell is highlighted
3. Open the Fade Curve
popup [MODIFY]
The popup is opened. If no
curves are defined it will
only have "No curve".
4. Select a Curve
Arrow keys The selected curve is
highlighted
5. Confirm [MODIFY] The popup is closed and the
selected curve is assigned
to this step.