ETC Cobalt Family v7.1.0 - Manual (Page 403)

Cobalt 7.1 - 20140612
402
Insert A Sequence Step - In The List
Function Shortcut Feedback
1. Open the Sequence list [#] [SEQ]
The List for sequence # is
opened.
2. Move to the step you
wish to insert a new step
after Arrow Keys The selected step is
highlighted in yellow.
3. Insert Preset # [#] [INSERT] The preset is inserted after
the selected step
NOTE
You can use COPY, CUT and PASTE to insert and delete steps in the
Sequence List as well. See
Copy, Cut & Paste .
NOTE
The Preset does not bring sequence texts, fade times or links from other
sequence steps if it has been used earlier.