ETC Cobalt Family v7.1.0 - Manual (Page 381)

Cobalt 7.1 - 20140612
380
Sequences - List
Press SEQ in the programming section to open the Sequences List. You can insert and delete
sequences, and change playback modes (normal/chase). (BROWSER >Main Show Data
>Sequences...).
Sequences List - Insert/Delete/Load
Function Key Feedback
Insert [#] [INSERT] Sequence # is inserted into
the list
Delete
[DELETE]
The selected sequence is
deleted*
Load [Master_Key] The selected sequence is
loaded to this Master
Playback.
*The Sequence is deleted, and all timing and text information. The Preset still exists in the Preset list
and can be used again.