ETC Cobalt Family v7.1.0 User Manual
Page 998

Cobalt 7.1 - 20140612
997
Visualisation - Capture
In the computer hosting Capture you need to make sure IPX is active and that the frame type is set to
802.3. Capture will recognize Cobalt on the network and patch it automatically providing Cobalt is set
up with IPX and LINK on as described in the beginning of this chapter.
Accessories - Visualisation
Software
.
Example - getting started
1. Start Capture and open the demo play Sketching.
2. Open the demo play Sketching in Cobalt.
NOTE
There is a plug-in for Training Projects powered by Capture. See
Media -
Training Projects
.
Capture can be downloaded from
www.capturesweden.com
Visualisation - Blind output
This is not available in v6 because it conflicted with the new Blind attribute handling. In addition, it
only worked on IPX protocol.