INFICON T-Guard Leak Detection Sensor User Manual
Page 24
22
Description
jina
85
e 3
.fm
Tech
ni
ca
l Ha
nd
bo
ok
(1
11
2)
Entering the Menu-PIN
1
Press the E
SC
-button (soft key No.1) to leave this menu page and to return to the
previous menu page. The Menu-PIN will then neither be changed nor be entered.
2
Pressing a number button opens a submenu where you can select one of these two
numbers. After that, the cursor moves to the next digit to the right.
3
You can move the cursor to the left or to the right using the soft keys No. 4 and 8.
(
← and → ).
4
OK appears for soft key No. 8 when the last digit has been reached.
5
Pressing OK causes the PIN to be stored.
Status Line in the Display
The lowest line of the display is the status line. It shows general information, for
instance, the actual measurement mode.
Fig. 4-13 You can change the value and the unit on this menu page
Fig. 4-14 Entering the Menu-PIN