INFICON T-Guard Leak Detection Sensor - Manual (Page 70)

68
Maintenance
jina
85
e 6
.fm
Tech
ni
ca
l Ha
nd
bo
ok
(1
11
2)
6.3 Replacing the Internal Fuses
Tools : 3 mm Torx screw driver
Open the housing:
1 Remove 4 screws from the bottom.
Caution
Before opening the housing to replace a fuse, disconnect the T-Guard™ Leak
Detection Sensor from the power supply.
Fig. 7-4 Bottom view of the T-Guard™ Leak Detection Sensor
Item Description
1
Screws on bottom