INFICON Sensistor ISH2000P Hydrogen Leak Detector, Panel Model - Manual (Page 7)

Hydrogen leak detector Sensistor ISH2000 - Operating Instructions
OP-Sensistor ISH2000-EN-201203 5
EN
The battery, a Li-ion battery at 14.8 V, can not support the current required to
operate external probes.
On the display (in Detection and Analysis Mode) a symbol in the upper right corner
shows the battery charge status. Sensistor ISH2000C will operate for 14 hours on a
fully charged battery with screensaver and mute function. And 9 hours without
screensaver and mute function.
One hour charging will give about one hour of operating time. This can be done
when necessary, but it is important to regularly fully charge the battery.
Fig 2-2. The battery operated model consists of seven parts.
2.3 Sensistor ISH2000P
The panel mount model, Sensistor ISH2000P, has identical features of the Sensistor
ISH2000.
The difference is that the Sensistor ISH2000 can be installed in the operator’s panel
or any other flat surface. Also it operates on +24 VDC. Mounting brackets and a
panel rubber seal are delivered with the detector. See “Sensistor ISH2000P
installation” on page 38.
Item Description
1 Detector unit
2 Hand Probe P50 (shown) or P50-Flex
3 Probe cable C21
4 Battery charger (the battery charger are country
specific and may differ, not shown).
5 User manual (not shown)
6 User manual CD (not shown)
7 Product return form (not shown)
1
2
3