Intelix ASW-WP Installation Manual - Manual (Page 17)

ASW-WP Installation Guide
Display Control Software
By using the free software “Intelix Display Control”, the ASW-WP may be used to control power
and input status of the LCD or Projector connected to the HDBaseT receiver (DIGI-HD60C-R).
When the ASW-WP is “woken up” from low-power standby mode, it will send the
preprogrammed “Power ON” command, followed by the “Input Select” command. When the
ASW-WP times out due to lack of video or activity, it will send the preprogrammed “Power Off”
command. This will effectively synchronize the power states of the display and the ASW-WP,
eliminating the need for a 3 rd party control system in many systems. Use the following
instructions to configure and program the ASW-WP for this method.
1. Download and install the Intelix Display Control software from the ASW-WP
Documentation and Downloads page at www.intelix.com . An installation guide is
included to assist you with this process.
17