Intelix ASW-WP Installation Manual - Manual (Page 25)

ASW-WP Installation Guide
HDBaseT Signal Characteristics
Maximum Distance 60 m
Cable Requirements Category 6, or 6A with TIA/EIA-568B crimp pattern
(shielded cable and connectors are recommended)
Bandwidth 10.2 Gbps
Gain 0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
Return Loss < -30 dB at 5 KHz
Total Harmonic Distortion (THD) < 0.005% at 1 KHz
Min-Max Signal Level < 0.3 V – 1.45 Vp-p
Differential Phase Error ±10° at 135 MHz over 100 m
Chassis and Environmental
Construction Black painted metal plate (Back Cover)
Faceplate Colors White ABS Plastic
Dimensions 114mm x 116mm x 35mm (4.49 in. x 4.57 in. x 1.38 in.)
Shipping Weight 0.45 kg (1 lbs.)
Operating Temperature 0° to +40° C (+32° to +104° F)
Operating Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power, ESD, and Regulatory
Power Supply 5vDC 2A or PoE (Power over Ethernet)
Power Consumption 10 watts
Default Automatic Standby Mode 30 minutes no signal
ESD Protection 16kV
Regulatory CE, RoHS
Other
Warranty 2 years
Diagnostic Indicators Front Panel: Two (2) Bicolor LED: Blue, (Purple), Amber
HDBaseT: Three (3) SMDs: Heartbeat – Blue, Link –
Yellow, HDMI – Green
Included Accessories White Faceplate Set and Installation Manual
HDBaseT Receiver (A/V, PoE, Control)
Compatibility
DIGI-HD60C-R
HDBaseT Receiver (A/V, Control)
Compatibility
DIGI-HDE-R, FLX-BI4
HDBaseT Receiver (A/V Only)
Compatibility
DIGI-HD70-R
Distances and picture quality may be affected by cable grade, cable quality, source and destination equipment, RF
and electrical interference, and cable patches.
25