Intelix ASW-WP Installation Manual - Manual (Page 7)

ASW-WP Installation Guide
Installation Instructions
Basic Installation
This diagram shows the most basic application for the ASW-WP. Follow the instructions below
for installation of this system.
1. Turn off power and disconnect the audio/video equipment by following the manufacturer’s
instructions.
2. Connect twisted pair cable between the transmitter (ASW-WP) and the receiver (DIGI-
HD60C-R). Ensure T568B straight-thru wiring.
3. Install the ASW-WP into the wall box using the included screws.
4. Install the 2-gang cover plate using the included screws.
5. Connect HDMI cables between the display and the receiver (DIGI-HD60C-R).
6. Connect the power supply (PS-24D-25) to the receiver. Connect the power supply to an AC
outlet.
7. Power on attached audio/video devices.
8. Connect HDMI or VGA /Audio sources.
7