Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 101)

TM
Model 3110 M0244-01
9/12 6-1
Lubrication and Maintenance
LUBRICATION
Following pages show locations of all lubrication
points. Proper lubrication of moving parts helps ensure
efficient operation of your Kinze planter and prolongs
the life of friction producing parts.
LUBRICATION SYMBOLS
Lubricate at frequency indicated with an SAE multipurpose
grease.
Lubricate at frequency indicated with a high quality SAE
10 weight oil or a quality spray lubricant.
SEALED BEARINGS
A number of sealed bearings are used on your Kinze
planter to provide trouble free operation. These are
located in such areas as the drive shaft, row units, and
transmission bearings. Sealed bearings are lubricated
for life and not serviceable.
DRIVE CHAINS
Lubricate all transmission and drive chains daily with
a high quality chain lubricant. Extreme operating
conditions such as dirt, temperature, or speed may
require more frequent lubrication. If a chain becomes
stiff, it should be removed, soaked, and washed in
solvent to loosen and remove dirt from joints. Soak
chain in oil so lubricant can penetrate between rollers
and bushings.
Seed Rate Transmission Drive Chains
Pull Row Unit Drive Chains
Row Unit Granular Chemical Drive Chains
wARNING
Uncontrolled machine movement can crush or
cause loss of control resulting in death, serious
injury, or damage to property and equipment.
Install all safety lockup devices before working
under or transporting this equipment.