Coulter mounted residue wheels, Coulter mounted residue wheels -18 – Kinze 3110 Mounted Planter Rev. 7/14 User Manual
Page 48
M0244-01
Model 3110
3-18 9/12
TM
Row Unit Operation
DUAL GAUGE wHEELS
Dual gauge wheels are used to provide added width for additional
row unit flotation in light sandy soil.
In some applications such as narrow row widths (less than 36")
or where clearance is a problem, the added width of the dual
gauge wheel may prevent its use.
COULTER MOUNTED RESIDUE wHEELS
Coulter mounted residue wheels are designed for use on pull row units and push row units. Row unit extension
brackets are required on the four center pull row units if the planter is equipped with coulter mounted residue wheels.
Coulter mounted residue wheels
Residue wheels attach to row unit mounted coulter with two cap screws and sleeves allowing unit to free-float. A
2-position spindle bolt mounting positions wheels interlocked or staggered. Depth adjustment is made with a spring-
loaded cam and pin with 11 positions in ¼" increments. A high point on the cam allows wheels to be locked up.
A weed guard on the inboard side of each wheel helps prevent weed wrap which can cause premature bearing failure.
NOTE: Opening in weed
guard must face down.
Weed guard