Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 19)

TM
Model 3110 M0244-01
9/12 2-7
Machine Operation
PARKING STAND ADJUSTMENT
Two parking stands, located on front side of main frame, are standard on all Model 3110 planters. The stands must be
positioned so they are not directly behind tractor tire or they will hit when planter is raised.
Raise to top position and pin when planting. Lower and pin for parking and storage.
On planters equipped with front mounted drive wheels, parking stands are not required.
Each parking stand has six positioning holes. By using these positioning holes, you can set toolbar height from 19" to 25".