Coulter mounted residue wheels, Row unit mounted residue wheel, Granular chemical attachment – Kinze 3110 Mounted Planter Rev. 7/14 User Manual
Page 120: Spring tooth incorporator, Coulter mounted residue wheels -20, Row unit mounted residue wheel -20, Granular chemical attachment -20, Spring tooth incorporator -20
M0244-01
Model 3110
6-20
9/12
TM
Lubrication and Maintenance
ROw UNIT MOUNTED RESIDUE wHEEL
Wheel hub is equipped with sealed bearings. If a bearing
sounds or feels rough when wheel is rotated, replace them.
COULTER MOUNTED RESIDUE wHEELS
Wheel hubs are equipped with sealed bearings. If bearings
sound or feel rough when wheel is rotated, replace them.
Coulter mounted residue wheels
GRANULAR CHEMICAL ATTACHMENT
Before storing planter, disengage granular chemical drive by
rotating throwout knob ¼ turn counterclockwise. Remove drive
chain and empty and clean all granular chemical hoppers.
Clean drive chains and coat them with a rust preventive spray
or submerge chains in oil. Inspect and replace worn or broken
parts.
Install hoppers and chains. Check chain alignment.
Disengage
Engage
Granular chemical throwout knob
SPRING TOOTH INCORPORATOR
Before storing planter, inspect each spring tooth incorporator
and replace worn or broken parts. Check for loose hardware
and tighten as needed.
Spring tooth incorporator
Row unit mounted residue wheels