Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 32)

M0244-01 Model 3110
3-2 9/12
TM
Row Unit Operation
Optional closing wheel shield is installed on underside
of closing wheel arm to help prevent root balls and
stalks from clogging closing wheels.
CLOSING wHEEL SHIELD (RUBBER OR CAST IRON “V” CLOSING wHEELS)
Closing wheel shield
(Shown with closing wheel removed)
Drag closing attachment pulls loose soil over the seed trench.
NOTE: Use of a seed firming wheel or other seed firming device is recommended with drag closing attachment.
Front and rear adjustment is made using the slotted holes in the blades. Adjust all rows the same.
Eccentric bushings in the wheel arm stop allow for lateral adjustment of the drag closing attachment. Use a ¾" wrench
to loosen hardware attaching closing wheel arm to wheel arm stop. Use another ¾" wrench to turn eccentric bushings
until drag closing attachment
is aligned with seed trench. Tighten hardware.
DRAG CLOSING ATTACHMENT
Eccentric bushing
Adjustment slots
Blade
Drag closing attachment