Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 9)

TM
Model 3110 M0244-01
9/12 1-5
Specifications
SPECIFICATIONS
Planter Size 6 Row 30" 6 Row 36"/40" 8 Row 30" 8 Row 36"/40"
Width - Transport
(Includes Markers) 17'-8" (5.4M) 21"-0" (6.4M) 21'-10" (6.7M) 27'-8" (8.4M)
Width - Planting 17'-8" (5.4M) 21"-0" (6.4M) 21'-10" (6.7M) 27'-8" (8.4M)
Weight (Mechanical) 2483 lb. (1105.86 kg) 2560 lb. (1161.2 kg) 3092 lb. (1402.5 kg) 3494 lb. (1584.85 kg)
Weight (EdgeVac) 2763 lb. (1253.28 kg) 2854 lb. (1294.55 kg) 3407 lb. (1545.4 kg) 3830 lb. (1737.26 kg)
Toolbar 7" x 7" x ¼" wall 7" x 7" x ¼" wall 7" x 7" x ¼" wall 7" x 7" x ¼" wall
Seed Capacity 1.75 bu. (EdgeVac/Hopper); 1.90 bu. (Mechanical/Hopper)
Tires Two 7.60" x 15" 8 ply - adjustable height
Drive System Two 4.10" x 6" spring-loaded contact drive tires with no. 40 chain
Seed Transmission Two wheel module-mounted, quick-adjust with machined sprockets and no. 40 chain
Drive/Drill Shafts ⅞ ' hex drive/drill shafts
TRACTOR HYDRAULIC REqUIREMENTS
Configuration Requirements Description
Base machine with mechanical
meters
0 SCV 0 gpm No hydraulic requirements
Base machine with mechanical
meters and optional row marker
package
1 SCV 10 gpm
#1 SCV: row markers with sequencing/flow control
valve
Base machine with vacuum
meters (external case drain
required for EdgeVac hydraulic
circuit)
1 SCV 15 gpm #1 SCV: Vacuum metering
Base machine with vacuum
meters and optional row marker
option (external case drain
required for EdgeVac hydralulic
circuit)
2 SCV 25 gpm
#1 SCV: Vacuum metering
#2 SCV: row markers with sequencing/flow control
valve
GENERAL INFORMATION
The Model 3110 Mounted Planter is available with EdgeVac or mechanical meters, conventional hoppers, and various
other options. Contact your Kinze dealer for additional options which may be available for your specific model year planter.
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves the
right to change specifications or design without notice and without incurring obligation to install the same on machines
previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.