Sensor programming, Isobus m0246, 11 configuration wizard (continued) – Kinze ISOBUS Electronics Package (3000 Series) Rev. 5/14 User Manual
Page 17: Planter configuration
CONFIGURATION wIZARd (Continued)
Page 5 - Congratulations! You will see this screen after you have properly defined your planter.
Click DONE. The system will automatically shut down and reconfigure for your planter.
When the system is finished rebooting, you will be at the Muxbus screen. The system will instruct you in which order
to plug in your sensors.
With all of the sensors unplugged from the main harness, select Auto Detect.
A list will appear on screen that will instruct when and how to plug in different sensor types.
The list can also be viewed by selecting the drop down list in the center of the screen.
IMPORTANT: Sensors must be programmed in exact order. Follow instructions on screen.
Each time a sensor is plugged in, the display will beep.
In the center of the screen, there will be a count of how many sensors are left to program.
Once all sensors are plugged in, the status screen will reappear.
Configuration Wizard - Page 5
Congraulations you have successfully
described your planter. Please press
the DONE button to sae this
configuration. Be aware that the
system will be restarted.