Offsets and look aheads, Offsets – Kinze ISOBUS Electronics Package (3000 Series) Rev. 5/14 User Manual

Page 29

Advertising
background image

TM

ISOBUS

M0246

Rev. 5/14

23

Offsets and Look Aheads

OFFSETS

The offsets for the planter will be prepopulated in the Task Controller. It is recommended that these measurements are
checked and adjusted on each planter. Also ensure that the measurements for the tractor are entered and correct.

Below is an example of John Deere’s offset entry screen for the planter. Measurements will be prepopulated in this
screen but the measurements need to be confirmed on the planter prior to planting.

John deeres Change Planter Offsets Screen

Advertising