Settings, Settings screen, Speed input – Kinze ISOBUS Electronics Package (3000 Series) Rev. 5/14 User Manual

Page 35: Settings screen speed input, Isobus m0246, 29 settings screen, Rev. 5/14

Advertising
background image

TM

ISOBUS

M0246

Rev. 5/14

29

SETTINGS SCREEN

Tap the settings button to toggle through the settings screens. Options include Population Monitoring, Speed Input,
Pneumatic Down Force, Vacuum, Bulk Fill Pressure, Bulk Fill Scale, Seed Sensor Sensitivity, and MUXBUS. Tap on
each item to view settings and make adjustments.

SPEEd INPUT

In the Speed Input settings screen, the ground speed source can be selected, the planter speed sensor can be calibrated,
the manual ground speed can be set, and speed readouts can be seen for each speed source.

Selecting a Current Ground Speed Source

There are 6 possible selections for the Ground Speed Sources:

Manual – Uses a ground speed source that is set by the user.

Planter Ground Speed – A speed sensor located on the planter that is connected to the

PMM via the Muxbus.

Tractor Wheel Speed – Wheel speed sent by the Tractor over the ISOBUS.

Tractor Radar Speed – Radar speed sent by the Tractor over the ISOBUS.

GPS Speed – GPS speed sent by the GPS Receiver over the ISOBUS.

Automatic – Uses the best possible speed available from one of the following sources, in this order:

1.

GPS

2.

Radar

3.

Wheel

4.

Planter

Note: Kinze recommends that the speed source be set to automatic under normal operating circumstances.

Note: Not all tractors and GPS receivers broadcast speed over the ISOBUS check with your equipment
manufacturer to see if it is compliant.

Prev

1 . S p e e d I n p u t S e t t i n g s

2 . S p e e d I n p u t V a l u e s

MANUAL GROUND SPEED

CURRENT GROUND SPEED SOURCE

50500

PLANTER SENSOR PULSES PER MILE

4.0

MANUAL GROUND SPEED

P l a n t e r s p e e d s e n s o r
Tr a c t o r w h e e l s p e e d
Tr a c t o r r a d a r s p e e d
G P S s p e e d
A u t o m a t i c

0 . 0 m p h
0 . 0 m p h
0 . 0 m p h
0 . 0 m p h
0 . 0 m p h

3:00 PM

ON

F

E

J

AUTOSWATH

25

DOWNFORCE

DEPTH

10

Prev

CROP TYPE

CORN

POPULATION

S P E E D I N P U T TC

SETTING

3:00 PM

ON

F

E

J

AUTOSWATH

25

DOWNFORCE

DEPTH

10

Prev

CROP TYPE

CORN

POPULATION

Prev

Population Monitoring

Speed Input

Pneumatic Down Force

Vacuum

1. Select item below

SETTINGS TC

Settings

Advertising