Landoll BDH512 Double Seeder Hitch - Manual (Page 28)

3-2 F-645
OPERATIONS
Attaching the Seeders
NOTE
When attaching two seeders of different widths, attach
the wider seeder always to the front hitch, and use the
cylinder attaching holes specified for the wider seeder.
• With the Double Seeder Hitch in the transport
position and the second seeder positioned as shown,
drive as closely as possible to the hitch point of the
second seeder.
• As soon as the front seeder is past the hitch of the
second seeder, operate the hitch in the field position
and turn the tractor to the right so that the rear hitch
gets closer to the rear seeder.
• Disengage the pin from the rear hitch to allow the
hitch plate to extend out and swing in either direction.
Engage the pin on the rear hitch plate after attaching
to the seeder.
Figure 3-2: Attaching the Seeders
5HDU+LWFK/RFN3LQ