Caution – Landoll SS/SSB/SSP/SSBP 8, 10, 12 Sure Stand Seeder User Manual
Page 15
Advertising
ASSEMBLY INSTRUCTIONS
2-5
Figure 2-5: Spindle
7.
Remove the (2) 5/8” shipping bolts which lock the
rear roller arms down. One bolt is used on each side
of the machine. See Figure 2-6.
Figure 2-6: Shipping Bolt
CAUTION
8.
Install the LED Warning Lamps and Harnesses. See
Figure 2-7.
Op WhlArm9J324HubTire
Wheel Bolt,
1/2-20 x 1”
Locknut,
1/2-13
Spindle
HHCS,1/2-13 x 3”
5/8” SHIPPING
BOLT
Do not disengage pin unless seeder is fully
attached to tractor. Seeder may be rear-heavy and
tip backward on frame.
Advertising