Landoll SS/SSB/SSP/SSBP 8, 10, 12 Sure Stand Seeder - Manual (Page 42)

3-4 1P480
OPERATION
Calibration of Seed Boxes
Steps 1-3 apply to all model sizes.
Front Seed Box may be calibrated for unlisted seed as
follows:
1. Remove Drive Bolt near 13 tooth (or optional 26
tooth) Driver Sprocket. See Figure 3-6.
2. Raise Machine and Lock in transport position.
3. Place a canvas or tarp under machine to catch seed.
Figure 3-6: Driver Sprocket
37 TOOTH
DRIVEN
23 TOOTH
DRIVEN
13 TOOTH DRIVER
26 TOOTH OPTIONAL
15/16 HEX
TIGHTENER