Landoll SS/SSB/SSP/SSBP 8, 10, 12 Sure Stand Seeder - Manual (Page 39)

3-1
Chapter 3
Operation
Seeder Operation
This chapter covers the basic operation and usage
procedures for the Landoll Brillion Sure Stand Seeder. Be
sure to read and understand the Safety Procedures and
Cautions starting on page 1-1.
Seeder Transport Lock (Pull Type
Only)
To prepare the machine for transport, raise machine fully
and pin transport lock in place on each lift cylinder.
For field operation:
Disengage each transport lock and replace the pin. The
lock rests on the wheel arm; the pin is in front of lock. See
Figure 3-1.
IMPORTANT
If the pin is not installed, the transport lock may
bounce up and cause significant damage to the
cylinder and fittings.
Figure 3-1: Transport Lock
Parking Pin (Pick-up Seeders Only)

WARNING
Figure 3-2: Parking Pin
Transport Lock
Lock Pin
Hairpin
Cotter
Wheel Arm
To prevent the implement from tipping backward
on the frame, disengage parking pin only when
the seeder is fully attached to the tractor. Be sure
to observe the following sequences.
Klik Pin
Parking Pin