Attaching, detaching and storage, Maintenance safety, High pressure fluid safety – Landoll SS/SSB/SSP/SSBP 8, 10, 12 Sure Stand Seeder User Manual

Page 7: Protective equipment, Chemical safety, Prepare for emergencies, Tire safety

Advertising
background image

SAFETY INFORMATION

1-3

Keep clear of overhead power lines and other
obstructions when transporting. Know transport height
and width of your implement. Refer to transport
dimensions. See Table 5-1.

Attaching, Detaching and Storage

• Do not stand between the tractor and implement when

attaching or detaching implement unless both are not
moving.

• Before applying pressure to the hydraulic system, be

sure all connections are tight and that hydraulic lines
and hoses are not damaged.

• Lower implement to ground when not in use so that

the shanks are taking the load.

• Block implement so it will not roll when unhitched from

the tractor.

• Relieve pressure in hydraulic lines before uncoupling

hydraulic hoses from tractor.

NOTE

On most tractors relieving hydraulic pressure can be
accomplished by operating valves after the engine is
stopped.

Maintenance Safety

• Block the implement so it will not roll when working on

or under it to prevent injury in case of hydraulic failure
or inadvertent lowering by another person.

• Do not make adjustments or lubricate implement while

it is in motion.

• Make sure all moving parts have stopped and all

system pressure is relieved.

• Understand all maintenance procedures before doing

the work. Use the proper tools and equipment.

High Pressure Fluid Safety

Escaping fluid under pressure can be nearly invisible and
have enough force to penetrate the skin causing serious
injury. Use a piece of cardboard, rather than hands, to
search for suspected leaks.

Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.

Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.

NOTE

On most tractors relieving hydraulic pressure can be
accomplished by operating valves after the engine is
stopped. Also, the implement should be lowered to
ground so that the shanks are taking the load.

Wear protective gloves and safety glasses or goggles
when working with hydraulic systems.

Protective Equipment

• Wear protective clothing and equipment.

• Wear clothing and equipment appropriate for the job.

Avoid loose fitting clothing.

• Because prolonged exposure to loud noise can cause

hearing impairment or hearing loss, wear suitable
hearing protection, such as earmuffs or earplugs.

Chemical Safety

Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property.

Read chemical manufacture’s instructions and store or
dispose of unused chemicals as specified.

Handle chemicals with care and avoid inhaling smoke
from any type of chemical fire.

Store or dispose of unused chemicals as specified by the
chemical manufacturer.

Prepare for Emergencies

• Keep a First Aid Kit and Fire Extinguisher handy.

• Keep emergency numbers for doctor, ambulance,

hospital and fire department near the phone.

Tire Safety

Tire changing can be dangerous and should be
performed by trained personnel using correct tools and
equipment.

When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side, not in
front of or over the tire assembly. Use a safety cage if
available.

When removing and installing wheels use
wheel-handling equipment adequate for the weight
involved.

Use the safety chain to help control drawn machinery
should it separate from the tractor drawbar.

Advertising