Lenze smd Series Drives - Manual (Page 2)

This documentation applies to the use of an smd Series Variable Frequency Drive in a Modbus Network and
should be used in conjunction with the smd Series Operating Instructions (Document SL03) that shipped with the
drive. These documents should be read in their entirety as they contain important technical data and describe the
installation and operation of the drive.
Modbus ® and Modicon ® are registered trademarks of Schneider Electric; http://www.schneider-electric.com.
For more information about the Modbus Protocol please refer to the Modicon Modbus Protocol Reference Guide;
http://www.Modbus.org
© 2003 AC Technology Corporation
No part of this documentation may be copied or made available to third parties without the explicit written approval
of AC Technology Corporation. All information given in this documentation has been carefully selected and tested
for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. AC
Tech does not accept any responsibility nor liability for damages that may occur. Any necessary corrections will be
implemented in subsequent editions.
About These Instructions