Lenze EMF2192IB - Manual (Page 21)

Installation
Mechanical installation
5
l
21 EDSMF2192IB EN 3.1
5.1 Mechanical installation
2102LEC014
Fig. 5−1 Attaching the communication module
ƒ Plug the communication module onto the standard device (here: 8200 vector).
ƒ Tighten the communication module to the standard device using the fixing screw in
order to ensure a good PE connection.
)
Note!
For the internal supply of the communication module by the 8200 vector
frequency inverter the jumper has to be adjusted within the interface opening
(see illustration above).
Observe the notes (
¶ 27).