Lenze EMF2192IB - Manual (Page 57)

Appendix
Codes
11
l
57 EDSMF2192IB EN 3.1
11.2 Codes
The objects specified in the table can be accessed via EtherCAT fieldbus. The objects are
implemented in the Lenze code structure. Writable codes are stored permanently and are
maintained after the communication module is switched off.
I
Tip!
The codes are visible in the object directory of the EtherCAT configuration tool.
Object Code Subcode Designation Access Information
Index
[hex] Subindex
0x58ED − C1810 − Software identification of the module R ^ 58
0x58EC C1811 − Software creation date R ^ 58
0x58E1 1 ... n C1822 1 ... n AIF input words (to the standard device) R ^ 58
0x58E0 1 ... n C1823 1 ... n AIF output words (from the standard device) R ^ 58
0x58DF 1 ... n C1824 1 ... n AIF input double words (to the standard device) R ^ 58
0x58DE 1 ... n C1825 1 ... n AIF output double words (from the standard device) R ^ 59
0x58D9 − C1830 − Bus status R ^ 59
0x58C5 − C1850 − Station alias address RW ^ 59
0x58A5 − C1882 − Response when exiting "Operational" RW ^ 59
0x58A4 − C1883 − Monitoring time when exiting "Operational" RW ^ 60
R: Read access only
RW: Read and write access