Lenze E82ZAFUC001 - Manual (Page 59)

Electrical installation
Assignment of the terminals
6
EDK82ZAFUC−001 DE/EN/FR 4.0
59
l
H2_BelegungAnschlKlemmen−klemmbesch−001
Assignment of the terminals
Terminal
X3/
Designation Function / level
CG CAN−GND Reference potential for CAN
CL CAN−LOW CAN data line (LOW)
CH CAN−HIGH CAN data line (HIGH)
59 External DC voltage supply for the function module:
l 24 V DC (21.4 V DC − 0 % ... 28.8 V DC + 0 %)
l Current consumption at 24 V DC: 80 mA
The current flowing to other nodes via clamp 59 when looping
through the supply voltage must not exceed 3 A.
7 GND1 Reference potential for X3/20 and X3/59
39 GND2 Reference potential of controller inhibit (CINH) at X3/28
28 CINH Controller inhibit
l Input resistance: 3.3 k
W
l Start = HIGH (+12 ... +30 V DC)
l Stop = LOW (0 ... +3 V DC)
(reference: GND2)
20 DC voltage source for the external supply of controller inhibit (CINH)
l +20 V DC (reference: GND1)
l I
max
= 10 mA