Lenze E82ZAFUC001 - Manual (Page 64)

7 Commissioning
Commissioning steps
EDK82ZAFUC−001 DE/EN/FR 4.0
64
l
H2_Inbetriebnahmeschritte−inbetrieb−schritte
Detailed
information Description Step
11. The master system effects the change to the "Operational" state at
the function module.
Response
l The two−colored LED "Connection status to the standard device"
(
0 ) is constantly illuminated with a green light.
l You can read (e.g. status word) or write setpoints (e.g. frequency
setpoint) via the PDOs.
^ 70
12. Enable standard device via terminal 28 (CINH).
l Set terminal 28 to HIGH level.
13. Select setpoint.
l The master sends the setpoint via the process output word
selected.
14. Now the drive starts.
15. Inhibit standard device.
l Via the bus (e. g. control word bit 9), or
l Set terminal 28 (CINH) to LOW level.