Residual hazards – Lenze EPL1020x−EI User Manual
Page 46
Advertising
![background image](/manuals/565972/46/background.png)
Safety instructions
Residual hazards
l
46
EDK10200EV3 DE/EN/FR 7.1
Residual hazards
}
Danger!
Mounting and installation of the Drive PLC may only be carried out in
de−energised state!
(
Stop!
Electrostatic discharge
Electronic components within the Drive PLC can be damaged or destroyed by
electrostatic discharge.
Possible consequences:
ƒ
The Drive PLC is defective.
Protective measures
ƒ
Free yourself from any electrostatic charge before you touch the Drive
PLC.
(
Stop!
Save cyclic parameter set
With "Save cyclic parameter set", the EEPROM can be damaged or destroyed.
Possible consequences:
ƒ
The Drive PLC is defective.
Protective measures
ƒ
Do not execute "Save cyclic parameter set"!
Advertising