Lenze EPL1020x−EI - Manual (Page 57)

Electrical installation
EMC−compliant installation
6
l
57 EDK10200EV3 DE/EN/FR 7.1
6 Electrical installation
EMC−compliant installation
PES
PES
PE
PE
PE
1
3
0
120
2
plc013
0 Mounting plate with electrically conductive surface.
1 Ground the cable shield with a large−area connection to PE (PES: HF shield connection via PE
connection).
Use the enclosed fixing brackets.
2 Signal cable for analog input and output signals.
Always use a shielded cable.
3 Signal cable for the system bus (CAN), with bus terminating resistor (120 W).
Always use a shielded cable.