Commissioning, Important notes, Initial switch-on – Lenze EPM−H606 User Manual
Page 88: Initial switch−on
Commissioning
Important notes
6
l
88
EDBPM−H605 DE/EN/FR 7.2
6
Commissioning
6.1
Important notes
}
Danger!
ƒ
Only the person activating the confirmation key may be present in
the danger area.
ƒ
The confirmation key is only suitable as a protective function if
the operator recognises dangers to persons in due time and
immediately takes measures to prevent any risk.
ƒ
EPM−H605 only
If the operating unit is disconnected, the stop key with stop
functionality is without effect. For this reason, always keep a
disconnected operating unit at a safe place.
6.2
Initial switch−on
Commissioning requires a complete wiring of the system bus.
Before switching on the supply voltage, check ...
ƒ
the complete wiring for completeness and short circuit,
ƒ
whether the bus system is terminated at the first and last physical node.