Magna-loc, Rake (off module) over decking – Metal Sales Magna-Loc Installation User Manual
Page 73
© Metal Sales Manufacturing Corporation / Subject to change without notice 6/12
73
MAGNA-LOC
rAKe (OFF MOduLe) OVer deCKING
Double Bead Tape Sealant
#10-12 x 1" PHW
Cleat
SSR Rake Cleat
Rake
Magna-Loc Panel
1
/
4
"-14 x
7
/
8
" Stitch XL (1' o.c.)
1
/
4
"-14 x 1
1
/
4
" Shoulder SD
Floating Rake Zee
Moisture Barrier (by others)
INstALLAtION NOtes
Magna-Loc Floating Rake Zee and Magna-Loc panels must be installed prior to rake installation (see pages 43-53).
1. Position and install Cleat to wall with appropriate fastener, 12"o.c. Make sure Cleat installation allows for proper Rake
attachment.
2. With Magna-Loc panel properly nested and fastened against Floating Rake Zee, apply a row of Double Bead Tape Sealant
across top of panel rib.
3. Install Rake flashing by sliding open hem onto Cleat and resting the Rake flashing on top of panel rib. Fasten through
Rake, Sealant, and into Floating Rake Zee with ¼"-14 x
7
/
8
" Stitch XL, 12"o.c.
4. If two or more flashings are required, lap the flashing over the previously installed flashing by a minimum of 2" placing a
bead of Tube Sealant between the flashings and securing with Pop Rivets 2.5"o.c.
#12-14 x 1
1
/
4
" SD XL (1' o.c.)
1
/
2
:12 slope
Minimum