Metal Sales Magna-Loc Installation - Manual (Page 8)

© Metal Sales Manufacturing Corporation / Subject to change without notice 6/12
8
MAGNA-LOC
_ _ Represents color code designation.
 See page 6 in this manual or Metal Sales color guides for color selection.
 Requires additional lead time.
ACG (Flat) 24 16" 2735141 130
ACG (Striated) 24 16" 2735241 130
ACG (Pencil Rib) 24 16" 2785041 130
PVDF Standard(Flat) 24 16" 28351_ _ 130
PVDF Standard(Striated) 24 16" 28352_ _ 130
PVDF Standard(Pencil Rib) 24 16" 28850_ _ 130
ACG (Flat) 22 16" 2935141 161
ACG (Striated) 22 16" 2935241 161
ACG (Pencil Rib) 22 16" 2985041 161
PVDF
 (Flat) 22 16" 30351_ _ 161
PVDF  (Striated) 22 16" 30352_ _ 161
PVDF  (Pencil Rib) 22 16" 30850_ _ 161
ACG (Flat) 24 18" 2735341 126
ACG (Striated) 24 18" 2735441 126
ACG (Pencil Ribs) 24 18" 2785241 126
PVDF Standard(Flat) 24 18" 28353_ _ 126
PVDF Standard(Striated) 24 18" 28354_ _ 126
PVDF Standard(Pencil Ribs) 24 18" 28852_ _ 126
ACG (Flat) 22 18" 2935341 156
ACG (Striated) 22 18" 2935441 156
ACG (Pencil Ribs) 22 18" 2985241 156
PVDF  (Flat) 22 18" 30353_ _ 156
PVDF
 (Striated) 22 18" 30354_ _ 156
PVDF  (Pencil Ribs) 22 18" 30852_ _ 156
FINISH GAUGE COVERAGE PRODUCT NO. WT/SQ
C
Factory Applied Sealant
Panel Coverage (Flat)
2"
2"
Factory Applied Sealant
Panel Coverage (Striated)
C C 2"
Factory Applied Sealant
6" 6" 6"
Panel Coverage (Pencil Ribs)
Sellersburg and Fontana Branches Only
90 o Seam
90° PANEL PROFILE
PANEL NOTES
1. For panel lengths over 45'-0", please inquire.
2. Minimum recommended roof slope: 1 /
2
:12.
3. All panels have factory applied sealant.
4. Oil canning is not a cause for rejection. Heavier gauges help minimize oil canning.
5. The Magna-Loc panel system requires the use of a mechanical seamer for proper installation. Contact Metal Sales for rental
information.
6. If requested, panels are factory notched and/or pre-punched for endlap conditions.
7. Finish: PVDF (Meets Kynar 500/Hylar 5000 Specs).
8. For additional information on product applications, loadings and flashing details, consult the Product or Installation
Manuals.