MK Diamond MK-100 Tracker - Manual (Page 12)

MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 12
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNIVERSAL STAND:
The MK-100 TRACKER weighs ninety-seven (97) pounds; follow the guidelines for transport in
the TRANSPORT section, when placing it on the stand.
Note: If using the MK Diamond, Universal Stand, follow the following steps.
(A)
Open the Universal Stand
and place on flat surface
(B)
Remove Water Basin
(C)
Orient the Saw
to the Stand
(D)
Seat Left (Post) Side of saw
onto stand between stand
Orientation Pin
(E)
Seat Right Side of saw onto
stand between stand and
Register Angle
(F)
Reinstall the Water Basin
Slide Water Basin out
of the front of the Saw
Left Side
of Saw
Left side
of stand
Right Side
of Saw
Right Side
of Stand
Orientation
Pin
Seat Left (Post)
Side of Saw
Left Side
of Stand
Right Side
of Stand
Right Side
of Saw
Register
Angle
Slide Water Basin
back in the Saw
Cutting
Table