MK Diamond MK-100 Tracker - Manual (Page 14)

MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 14
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
3. . Movable Cutting Table Installation:
4. Adjustable Cutting Guide Installation:
NOTE: The Adjustable Cutting Guide can be used on either side of the Diamond Blade.
5. Splash Guard Installation:
(A)
Install the retaining thumbscrew
through the washer and Splash
Guard then align to the hole found
on back of the Blade Guard
(B)
Install the Splash Guard
onto the Blade Guard
Retaining
Hole
Thumbscrew
Splash
Guard
Turn clockwise
To tighten
(A)
Align the four (4) wheels of the
Movable Cutting Table to the
saw Guide Rails
(B)
Seat all four (4) wheels onto the
Guide Rails
(C)
Verify movement of the Movable
Cutting Table
Guide
Rail
Guide
Rail
Wheel Wheel
Verify
movement
Turn counter-
clockwise to loosen
Adjustable
Cutting Guide
Ruler/Stop
Turn clockwise
to tighten
Adjustable
Cutting Guide
Ruler/Stop
(A)
Loosen Adjustable Cutting
Guide retaining thumbscrew
and place it over the Movable
Cutting Table Ruler/Stop
(B)
Place the Adjustable Cutting
Guide onto the Movable Cutting
Table Ruler/Stop and tighten
the retaining thumbscrew