MK Diamond MK-100 Tracker - Manual (Page 35)

MK-100 TRACKER Revision 02/03, Effective Date February 12, 2003 Page 35
MAINTENANCE AND TROUBLESHOOTING
5.2 Cutting Table Alignment:
Allen
Screw
Retaining
Screw
7/16-inch
wrench
Rotate counter-
clockwise to loosen
Retaining
Screw
Retaining
Screw
Rotate counter-
clockwise to loosen
7/16-inch
wrench
(A)
Locate the Frame Retaining
Screws and Allen screw
(B)
Loosen the front Frame
Retaining Screw
(C)
Loosen the back Frame Retaining
Screw
Allen
Screw
Allen
Wrench
Rotate counter-
clockwise to loosen
(D)
Loosen the front Frame Allen
Screw
Frame
Cutting
Table
Blade
Cutting
Groove
(E)
Adjust the Frame until the
Movable Cutting Table, Cutting
Groove is centered with the
Blade
(F)
Tighten the front Frame Retaining
Screws
Retaining
Screw
7/16-inch
wrench
Rotate clockwise
to loosen
7/16-inch
wrench
Retaining
Screw
(G)
Tighten the back Frame
Retaining Screws
Allen
Screw
Rotate clockwise
to loosen
Allen
Wrench
(H)
Tighten the front and back
Frame Allen Screws