Barco R9806700 - Manual (Page 29)

7. Locations of Controls
7. LOCATIONS OF CONTROLS
Overview
• On the ACSAR
• On the Remote Control
7.1 On the ACSAR
Front view
All controls for the ACSAR are provided on the front side.
Image 7-1
Location controls ACSAR
Controls function description
Ref. Function Description
1 Push button main power switch Button pressed, switches the ACSAR in the standby
mode.
2 Infra Red Receiver Infra Red reception diode for the IR signals from the IR
transmitter.
3 Black Dot Matrix display with green LED backlighting This display indicates the status of the ACSAR and also
the items when navigating through the different menu’s.
4 Start up and Random access adjustment mode selection
knob All source parameters and picture tuning are setup in
the adjustment mode.
R5976519 ACSAR 12122002 25