Barco R9806700 - Manual (Page 84)

15. Image Alignment
How to adjust the Input Balance
Always start with the BLACK balance adjustment if a dominant color has been observed in both areas.
1. From the Picture tuning menu, select item INPUT BALANCE. (menu 15-10)
The Input Balance menu appears on-screen and in the graphical display. This menu contains 2 items, viz. WHITE and BLACK
BALANCE
. (menu 15-11)
2. From the Input Balance menu, select item BLACK BALANCE and press ENTER or selection wheel to confirm.
The Black Level RED bar scale appears on-screen and in the graphical display.
Adjustment:
Changing from Black Level RED to BLUE bar scale, press respectively once cursor key ↑ or →.
Black Level RED
Cursor keys← and →
• Press the cursor keys ← or → to display the Black Level
RED bar scale.
• Press the cursor keys ← or → to adjust the RED level in
the dark areas of the image.
• Press EXIT to return.
With Remote control
Black Level BLUE
Cursor keys↑ and ↓
• Press the cursor keys ↑ or ↓ to display the Black Level
BLUE bar scale.
• Press the cursor keys ↑ or ↓ to adjust the BLUE level in
the dark areas of the image.
• Press EXIT to return.
With selection wheel
• At start up, Black Level RED bar scale is displayed.
• Rotate selection wheel to adjust the RED level in the dark areas of the image.
• Press selection wheel to display Black Level BLUE bar scale.
• Rotate selection wheel to adjust the BLUE level in the dark areas of the image.
• Press selection wheel to confirm and return.
• To repeat steps, press selection wheel again.
3. From the Input Balance menu, select item WHITE BALANCE and press ENTER or selection wheel to confirm.
The White Level RED bar scale appears on-screen and in the graphical display.
Adjustment:
Changing from White Level RED to BLUE bar scale, press respectively once cursor key ↑ or →.
White Level RED
Cursor keys← and →
• Press the cursor keys ← or → to display the White Level
RED bar scale.
• Press the cursor keys ← or → to adjust the RED level in
the white areas of the image.
• Press EXIT to return.
With Remote control
White Level BLUE
Cursor keys↑ and ↓
• Press the cursor keys ↑ or ↓ to display the White Level
BLUE bar scale.
• Press the cursor keys ↑ or ↓ to adjust the BLUE level in
the white areas of the image.
• Press EXIT to return.
With selection wheel
• At start up, the White Level RED bar scale is displayed.
• Rotate selection wheel to adjust the RED level in the bright areas of the image.
• Press selection wheel to display White Level BLUE bar scale.
• Rotate selection wheel to adjust the BLUE level in the bright areas of the image.
• Press selection wheel to confirm and return.
• To repeat steps, press selection wheel again. (image 15-3)
80 R5976519 ACSAR 12122002