Barco R9806700 - Manual (Page 52)

11. Overview GUI Menus
11.4 Entering the Adjustment mode
How to enter/to leave the adjustment mode
Starting from the operation mode of the ACSAR, the adjustment mode can be entered using the selection wheel on the ACSAR or
with its Remote Control, operating on the same IR address.
1. Rotate the selection wheel (1) until item MENU appears below the header ’Select’ and press the wheel to confirm.
Or,
Press the ADJ or the ENTER key (2) on the Remote Control.
The main adjustment mode menu appears in the graphical display and On-screen. (image 11-16)
2. In the main menu, rotate the selection wheel until the desired item, Random Access-Installation or Service, suits the pointer and
press the wheel to confirm.
Or,
Press the cursor keys ↑ or ↓ to highlight the desired mode and press ENTER to confirm.
The selected mode menu appears in the graphical display and On-screen.
3. To leave the adjustment mode, rotate the selection wheel until item RETURN suits the pointer in the graphical display and press
the wheel to confirm.
Or,
Press EXIT key on the Remote Control
The system leaves the adjustment mode.
SOURCE 6
"VIDEO625.C02"
SELECT
MENU
A D J E X I T
E N T E R
P A U S E
P H A S E
T E X T
S H A R P N 9 0
ADJUSTMENT MODE
RANDOM ACCESS
>INSTALLATION
SERVICE
OSD
ADJUSTMENT MODE
Select a path from
below
RANDOM ACCESS
INSTALLATION
SERVICE
Source 6
Select with
−
or
/
then <ENTER>
<EXIT> to return
ACSAR
1
2
Image 11-16
Entering the Adjustment mode
48 R5976519 ACSAR 12122002