Barco R9806700 - Manual (Page 87)

15. Image Alignment
Image 15-4
Position of PIP
15.4 Framing the Image (Blanking)
About framing the image
Blanking adjustment, affecting the edges of the image only, allow to blank unwanted information at the borders of the image or to
frame the image onto the screen.
How to frame the image
1. From the Random Access mode menu, successively select item GEOMETRY and BLANKING. (menu 15-14)
The Blanking menu appears on-screen and in the graphical display. The 4 Blanking menu items allow to frame the image on the
4 edges. (menu 15-16)
2. From the Blanking menu, successively select item TOP, BOTTOM, LEFT, RIGHT and proceed to the adjustments:
When an item has been selected, the corresponding bar scale appears on-screen and in the graphical display on the ACSAR (A
numeric value of “0” on the bar scale indicates no blanking applied). Proceed to the adjustment:
Adjustment
Numeric buttons
(Max. value for TOP and
BOTTOM is 255 — for LEFT
and RIGHT is 511)
• Press ENTER to activate the numeric value on the bar scale. The
first digit is active and can be changed.
• Enter new value, using the digit buttons on the Remote Control.
Next digit becomes active.
• Enter new value for second digit, using the digit buttons on the
Remote Control. Last digit becomes active.
• Enter new value for third digit, using the digit buttons on the
Remote Control and terminate value entry with ENTER.
• Press EXIT to return.
With Remote
control
Cursor keys← and →
• Press the cursor keys ← or → until the desired blanking on screen
is obtained.
• Press EXIT to return.
With selection
wheel
• Rotate selection wheel until desired blanking on screen is obtained.
• Press selection wheel to confirm and return. (image 15-5)
3. Press EXIT (RCU) or select item RETURN (ACSAR) to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
IMAGE SETTINGS
PICTURE TUNING
GEOMETRY
PIP
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX 
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX 
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
0HQX 
R5976519 ACSAR 12122002 83