Barco R9806700 - Manual (Page 30)

7. Locations of Controls
7.2 On the Remote Control
Top side
Image 7-2
Controls function description
Ref. Function Description
1 Function keys User’s programmable keys with functions for direct access.
2 ADJ (Adjust key) Toggle key to enter or to exit the adjustment mode.
3 Address key To match the address of the RCU with the ACSAR (number between 0 and 9).
4 Selection key no use
5 PAUSE key To stop projection for a short time, press ’PAUSE’. The image projection is
interrupted but full power is retained for immediate restarting image projection.
6 Standby key From a powered up ACSAR, pressing StdBy, switches the ACSAR into operation or
back into standby mode.
7 MUTE no use
26 R5976519 ACSAR 12122002