Barco R9806700 - Manual (Page 63)

13. Input Source File Service
OSD
EDIT FILE video625.C05
HORIZONTAL
TOTAL 864 PIXELS
ACTIVE 692 PIXELS
START 130 PIXELS
PERIOD 64.000 us
VERTICAL (FIELD)
TOTAL 313 LINES
ACTIVE 278 LINES
START 29 LINES
INTERLACED [ON]
READ AMDS
OPTIONS
−, / , , , . ,
<ENTER>, <EXIT>
064.000
064.000
1
2
4
3
064.000
5
RCU
E N T E R
E X I T
Image 13-7
adjusting the value itself with the digit buttons on the Remote Control
1 Press the ↑ or ↓ cursor key to select item to be changed
2 Press ENTER to activate the bar scale
3 Press ENTER to activate value number in bar scale
4 Press the digit button on the RCU to put a new value number
5 Press the ← or → cursor key to jump to the next number
6 Press ENTER to save value change
7 Press EXIT to return
Setting between brackets
1. Select item to be changed, using ↑ or ↓ cursor key, and follows instructions as indicated in drawing. (image 13-8)
OSD
A D J E X I T
E N T E R
P A U S E
P H A S E
T E X T
S H A R P N 9 0
EDIT FILE video625.C05
HORIZONTAL
TOTAL 864 PIXELS
ACTIVE 692 PIXELS
START 130 PIXELS
PERIOD 64.000 us
VERTICAL (FIELD)
TOTAL 313 LINES
ACTIVE 278 LINES
START 29 LINES
INTERLACED [ ON ]
READ AMDS
OPTIONS
−, / , , , . ,
<ENTER>, <EXIT>
RCU
1 2 3
ON OFF
E X I T
E N T E R
Image 13-8
Function setting using ENTER button as toggle key
1 Press the ↑ or ↓ cursor key to select item to be changed
2 Press ENTER to change the setting
7 Press EXIT to return
13.5.2 Changing the parameter settings with the selection wheel
How to use the selection wheel
1. Rotate the selection wheel to scroll through the menus or to change values.
2. Press the selection wheel to toggle or confirm.
3. Select RETURN in the menus, followed by pressing the selection wheel to return.
R5976519 ACSAR 12122002 59