Starting up the acsar, 1 starting up the acsar, 2 powering down the acsar – Barco R9806700 User Manual
Page 37: 33 9.2 powering down the acsar
9. Starting up the ACSAR
9. STARTING UP THE ACSAR
Overview
•
•
9.1 Starting Up the ACSAR
How Starting Up the ACSAR
Starting up the ACSAR, after its own power switch button (1) has been pressed, can be performed by:
Image 9-1
Starting up the ACSAR
•
Pressing the selection wheel on the ACSAR (2) in the standby mode (Item POWER is pointed in the graphical display).
•
Pressing STBY button on the Remote Control (3).
•
Pressing POWER in the ACSAR menu (4), displayed on the touch panel when consecutively HOME and ACSAR touch button
have been touched.
The ACSAR always starts up on the last selected source, whose file be displayed in the graphical display.
SOURCE 6 [H:15 kHz V:50 Hz]
"video625.c05"
SELECT
6. VIDEO [VIDEO]
Graphical Display
Image 9-2
9.2 Powering Down the ACSAR
Intro Powering Down
Powering down the ACSAR means switching the unit from operation mode into standby mode. To reduce power dissipation, if the
unit stays unused for a period and quick restart is required, the unit can be switched into the Economic mode.
Switching the unit into the standby mode can be performed as follows (image 9-1):
•
Rotate the selection wheel (2) until item STBY appears in the graphical display and press selection wheel (2) to confirm.
•
Press the STBY button on the Remote Control for a few seconds (3).
•
Press POWER in the ACSAR menu (4) on the touch panel.
•
From the Standby mode menu, rotate the selection wheel (2) until item ECONOMIC appears in the graphical display and press
selection wheel (2) to confirm.
R5976519 ACSAR 12122002
33