Barco R9806700 - Manual (Page 45)

11. Overview GUI Menus
How to enter your password
When a password protected item has been selected, a request for password entry appears on screen and in the graphical display
with already the first digit activated for changing.
1. Enter the first digit of your password, using the digit buttons on the remote control or the selection wheel (rotating=changing digit,
pressing=entering digit) (menu 11-1)
After entering the first digit, next digit is activated.
2. Apply the same procedure for the other 3 digits.
2 3 6 9
When the password entry is successful, the selected item or menu opens, otherwise an error message ’Invalid password’ is
displayed.
3. In case of an invalid password entry, press EXIT or press selection wheel to return.
PASSWORD
ENTER PASSWORD
__ __ __ __
Use numeric keys
<EXIT> to return
03: 

Factory programmed password for Owner, User and Guest: 0 0 0 0
11.3 Adjustment mode
Menus appears on-screen and in the graphical display on the ACSAR. Only on-screen menus are disabled
when the button TEXT on the remote control has been pressed.
Entering the adjustment mode
Entering the Adjustment mode
SOURCE 6
"none .c00'
SELECT
Menu
A D J E X I T
E N T E R
P A U S E
P H A S E
T E X T
S H A R P N 9 0
ACSAR
Remote Control
OSD
ADJUSTMENT MODE
RANDOM ACCESS
>INSTALLATION
SERVICE
RETURN
Graphical Display
ADJUSTMENT MODE
Select a path from
below
RANDOM ACCESS
INSTALLATION
SERVICE
Source 6
Select with
−
or
/
then <ENTER>
<EXIT> to return
Image 11-3
Entering the adjustment mode
R5976519 ACSAR 12122002 41